考虑重力因素的断溶体储层“井-洞-缝”模型试井解释方法

顺北油田属于大型断裂构造运动形成的断溶体储层，纵向裂缝系统和垂向分布的溶洞是主要的储集体空间.本文提出溶洞中的压力变化是由流动和波动共同产生的，依此把能量守恒方程与试井理论相结合，建立考虑重力因素的断溶体储层试井解释方法.定义无量纲量，并对无量纲方程进行Laplace变换，得到Laplace空间上的井底压力.由Stehfest数值反演算法得到试井分析所需的图版曲线.对重力因素进行敏感性分析表明：重力因素只影响双对数曲线的末期，当重力因素很明显时，曲线特征类似于定压边界.对新疆油田的某井进行分析，解释了曲线后期下掉原因，并给出溶洞体积以及波动相关参数等，分析结果与生产实际情况相吻合.     

理想弹塑性固体Riemann问题的解结构与初值条件

针对理想弹塑性固体材料的一维Riemann问题，在不考虑真空的情况下，讨论其所有可能存在的解结构，给出每一种解结构下对应的初值条件且证明该系列初值条件的完备性，即任意给定的物理量初值均有且只有一种解结构与之对应.基于该理论，在设计精确或近似理想弹塑性Riemann问题求解器时，可以依据初值条件对任意物理量初值直接判断其对应的解结构，从而提高求解器的精度和效率.数值试验验证了该系列初值条件的正确性和有效性.     

角锥棱镜谐振腔激光模式模拟研究

为了探究角锥棱镜谐振腔激光模式,以角锥-平面镜腔为例,将角锥棱镜等效为衍射光栅,考虑角锥镜棱宽在谐振腔中的衍射效应以及二面角误差引起的附加相位分布对谐振腔激光模式的影响,在光学谐振腔理论的基础上,建立了求解本征模式的理论分析模型.采用快速傅里叶法数值模拟不同腔长、角锥镜棱宽和二面角误差情况下该无源谐振腔激光输出模式分布情况.结果表明,在腔长30 cm、角锥镜棱宽小于75μm、二面角误差在-10′~5′之间时,可实现光斑完整的圆形分布输出模式,且有较好的光束质量;棱宽不小于0.4 mm,二面角误差在-40′~10′之间时,光斑为TEM 03阶横模,光场呈六瓣分布;当角锥镜棱宽为0.4 mm、二面角误差为3′,腔长从30~90 cm范围内增加时,该谐振腔输出的激光模式从TEM 03转换成TEM 10.     

Wide viewing optically clear adhesives using PMMA/TiO2 core-shell micro/nanoparticles

Abstract

Optically clear adhesives (OCAs) are widely used in optoelectronic displays because of their high outdoor visibility. Here, we develop new transparent adhesive films with wide-viewing-angle characteristics using poly(methyl methacrylate) (PMMA)/TiO₂ core–shell micro/nanoparticles. TiO₂ nanoparticles are embedded in the shell of PMMA microparticles, forming an organic–inorganic hybrid structure. To examine the optical transmittance of the films in the visible wavelength region, ultraviolet-visible spectroscopy is performed and light diffusion is evaluated. The TiO₂ nanoparticles in the shell of the PMMA microparticles exhibit improved light scattering, and the new functional OCAs are expected to provide wide-viewing-angle characteristics for future flexible displays.     

Wettability and surface energy of parylene F deposited on PDMS

For the first time, the wettability and surface energy of parylene F were investigated. The results showed that parylene F had a hydrophobic surface with an eigen water contact angle of 104.7 ± 0.6°. We found that 3.5 μl probe liquid was an optimal value for the contact angle measurement of parylene F. Moreover, we found that the Lifshitz–van der Waals/acid–base approach was unsuitable for determining the surface energy of parylene F, whereas the Owens–Wendt–Kaelble approach and the limitless liquid–solid interface wetting system were compatible. The surface energy of parylene F was estimated to be 27.06 mJ/m² (Owens–Wendt–Kaelble) and 40.41 mJ/m² (Limitless liquid-solid interface wetting system). Furthermore, this investigation also provided a reference for the applications of empirical and physics-based semi-empirical approaches for the estimation of surface energy.     

915 nm宽条形半导体激光器输出特性

为了研究温升对915 nm宽条形应变量子阱半导体激光器输出特性的影响,搭建了基于半导体制冷片(TEC)的双向温控平台对其进行了测试。首先,改变激光器的外表面温度,测量其在不同注入电流时的光功率和波长,并利用CCD相机测量其慢轴发散角。然后,利用计算机仿真软件对激光器的工作状态进行稳态模拟,从而获得了其对应的热分布情况,通过将模拟得到的数据与实验测量的结果进行比较,获得了两者趋于一致的结论:当热功率从2.1 W升高至20.0 W时,慢轴发散角从2.6°增大至5.0°,同时波长发生红移,热透镜焦距减小;激光器波长随温度变化关系的系数约为0.4 nm/℃,器件热阻为1.5 K/W。因此,为了同时获得高的输出功率和稳定的输出波长,有必要将激光器外表面温度精确控制在某一数值,否则波长将会发生漂移;此外,在设计制作高功率半导体激光器时,通过适当增加条宽并采用散热良好的封装结构,可以减小对慢轴发散角的影响。     

磁电弹性体中多条位错与Griffith裂纹

根据本征方程，研究磁电弹性体中若干平行螺型位错与Griffith裂纹的相互作用.结合Muskhelishvili方法和算子理论，得到磁电弹性体中由位错和裂纹所诱导的应力场、电场和磁场的解析解.数值算例表明：在裂纹的端点及位错点上仍然存在应力的奇异性，离位错点越远处广义力越小，结论与已有的结果相符，证明了结论的正确性.当位错点与裂纹端点距离越近时，裂纹与位错间的应力场越小，并逐渐趋近于零.     

含孔隙混凝土二维细观建模方法研究

根据混凝土的细观组成和结构特点,对传统二维建模方法加以继承与改进,提出了一种高效的分步入侵判定算法.将孔隙直观地反映在模型中,建立了不同的含孔隙混凝土细观模型.对含圆形、椭圆形、多边形骨料与圆形、椭圆形孔隙的混凝土标准试件分别进行了建模研究,结果表明本文的算法具有较强适用性.同时,通过对不同面积率与多种形状骨料/孔隙混凝土的大量建模进一步验证了该算法的效率.模拟了混凝土试件在单轴压缩下的准静态力学性能,分析了混凝土内部孔隙对其裂纹扩展的主要路径、破坏模式以及宏观力学性能的显著影响.     

Size-dependent thermoelastic initially stressed micro-beam due to a varying temperature in the light of the modified couple stress theory

The bending of the Euler-Bernoulli micro-beam has been extensively modeled based on the modified couple stress (MCS) theory. Although many models have been incorporated into the literature, there is still room for introducing an improved model in this context. In this work, we investigate the thermoelastic vibration of a micro-beam exposed to a varying temperature due to the application of the initial stress employing the MCS theory and generalized thermoelasticity. The MCS theory is used to investigate the material length scale effects. Using the Laplace transform, the temperature, deflection, displacement, flexure moment, and stress field variables of the micro-beam are derived. The effects of the temperature pulse and couple stress on the field distributions of the micro-beam are obtained numerically and graphically introduced. The numerical results indicate that the temperature pulse and couple stress have a significant effect on all field variables.     

Existence of solutions for a higher-order semilinear parabolic equation with singular initial data

We establish the existence of solutions of the Cauchy problem for a higher-order semilinear parabolic equation by introducing a new majorizing kernel. We also study necessary conditions on the initial data for the existence of local-in-time solutions and identify the strongest singularity of the initial data for the solvability of the Cauchy problem.